laser engraver and cutter technology

If the result of simulation is the same as you want, press button, and you can see the following dialog box.
Times and Delay: If you input 10 in “Times” and 20 in “Delay”, then press ”Runt”, you can get 10 same graphics. And it will stay for 20 seconds after every processing finished. The 20 seconds is for you to feed and take down material. You can set up different time according to your need. This function can increase efficiency a lot.
Feed: When you input a certain number in it, feeding motor will give a certain space after every processing finished.
Immediate: If you select this option, the software will take the position that the laser head is as original point. If you don’t select this option, the original point will be the position you set.
Move Frame: Laser head can move as a rectangle without laser emitting according to the size of the graphics. This function is used for confirming the location of workpiece.
Draw Frame: Laser head can move as a rectangle with laser emitting according to the size of the graphics. This function is also used for confirming the location of workpiece.
Log: Click this button, you can find the following dialog box. It will tell you the process time of one time and worked times.

Other information:
Quick operation: After you input data to the software, you can press “Run” button on the machine to process. The layer parameters are the same as last saved parameters. You need not save the data as LAS file and need not enter “output” dialog box. But the data may be lost without saving.

1.1 The introduction of software:
The software is explored for large-area and high-speed engraving and cutting. It can edit processing graphics, set up processing parameters, control processing procedure and output processing graphics.
The following is the main features and functions of this software:
A、It can support AI, BMP, PLT, DXF and DST (embroidery software) format.
B、After graphics input, you can do some simple editing (enlarge/reduce the size, circumrotate and copy etc.).
C、Data of different layers can be output respectively. Output power, output speed, mode (engrave and cut etc.) of each layer can be set respectively. All the parameters will be saved automatically.
D、Graphics can be engraved; Vector graph can be drawn, cut and engraved; precise level can be set up freely.
E、Support array output and the software can calculate the number of data to cover the material. Whole processing procedure can be simulated on computer through track emulation. The original point can be set anywhere to make the processing conveniently.
F 、When process is going on, it can be controlled by “Pause” and “Continue”. All output process can be controlled on the interface of machine.
G、When output, “process along dialog box” can make feeding and location easier.
H、Engraving speed can reach to 1500mm/s; Cutting speed can reach to 500mm/s; Engraving precision can reach to 0.1mm.
I、360 degree slope engraving. The slope can be set freely.
J、Mass graphics(›15M) can be calculated rapidly.
K、When the speed is changing, the power intensity will change automatically. It can insure the process depth is changeless.
L、Excellent optimized-path and path definition.
M、When cutting, you can add assistant lines. This can make the juncture smooth and output quality is increased.
N、The particular “part process” function can process from broken point. If the power is cut off, the machine will not produce waster.

1.2 Control system formulation
Control system is made up of hardware (control card) and software. Hardware includes one MPC03-LV control card, one FV100 module, one connecting cable and one P68 patch panel; and software includes drivers for the MPC03-LV control card and control software. The whole control system is contained in a packing carton and software in a CD.

spartanics announces the introduction of the spartanics laser-smart control system, an integrated system for laser cutting control that relies on smart sensing mechanisms. the spartanics laser-smart control system allows single operators to manage all laser cutting related operations simultaneously.

features of the laser-smart control system include-
o software that constantly monitors registration, web control, laser power, laminating, and slitting;
o smart sensing and continuous monitoring of machine and material status, including preset operator alarms and automatic shut-offs when needed;
o real-time display of production run status;
o programming of run length and system to automatically shut-off at completion of run.

spartanics laser-smart control system is offered in both the spartanics finecut laser cutting system and the spartanics finecut-plus laser cutting system.

the spartanics finecut laser cutting system provides unsurpassed registration precision and versatile handling of a wide range of substrates without the burn-throughs, pinholes and other defects created by systems with less capable laser engraving machine. kiss cuts, through cuts, engraving, serial numbering, scoring, scroll slitting, and perforating are readily handled by the spartanics finecut in a wide range of substrates including abrasives, polycarbonates, vinyls, adhesives, thin flimsy materials, among others.

at fespa 2008, inca digital printers launched the spyder 320 q fine quality digital uv flatbed printer for high end and closely viewed printing. the spyder 320 q fine quality features a new printhead, designed for inca, that accurately delivers a fine resolution 10 picolitre drop size at production speeds of up to 37 sqm/hr.
the result is a printer that produces fine quality, photorealistic prints at higher speeds.
the spyder 320 q fine quality is ideal for applications where a crisp image, fine lines and sharp text is critical such as high fashion graphics, gaming machine panels and closely viewed prints.
reversed out text as small as 4pt has smoother edges producing easier to read prints at all viewing distances.
‘this new spyder machine allows even smaller format size work to be effectively tiled up and with small drops delivering excellent reversed text and quality prints.
we are convinced that this represents a good choice for companies wishing to get very high quality at a sensible production speed as well as being a good complement to our existing range,’ says bill baxter, md of inca.
flexibility has contributed to the popularity of the spyder 320 product line.
since may 2004, inca digital has successfully introduced a number of spyder 320 digital flatbed printer models, including the original 4-colour spyder 320, the low-cost alternative spyder 320-e, spyder 320+ white and six color versions.
the eight color spyder 320-8 series was launched at isa in april earlier this year.
the spyder 320 series of uv flatbed digital printer is a very successful and versatile platform.
its flexible, modular design allows the end user to tailor the platform to suit their specific business and production needs.

the size of a format, select a customer should be based on business needs and funds for their own status, select the appropriate type of laser engraver and power of size.General desktop laser engraver and 600mm*600mm a 600mm*900 mm width, the feed is 700mm.sculpture is a small format engraving potatoesof, the application of admissibility is very good.No matter how small a bit of engraving machine price its phase almost, but when you want to cut carving Board, cumbersome and unnecessary waste.large format of the tools’spindle 1200mm engraver have 1200mm, 200mm, 1500mm 1500mm 2400mm, 2400mm, tabll 3000 mm above the tools’spindle branch width engraver into more than 1350mm, now available in the Lucite and PVC sheet sizes are 1300mm * 2400mm, so these few tradeshow on demand large format engraver customer is more suitable.

Second, spindle motor
spindle motor is computer engraver important parts, its performance on the computer’s performance engraver machine’bodywork crucial effect.machining spindle usually divided into two categories: precision machining spindle and high-power neureotomy spindle.
1, precision machining spindle is characterized by low noise, high speed, height, suitable for processing special delicateoperation, precdence, thenameplate, such as the seal of the breastplate, gifts, etc.This class is typically a high-speed motor inverter motor, power, as smaller 250W following.the disadvantage is that thick cut the material on the less, allogenelc neureotomy thicker material.
2, high-power neureotomy neureotomy, mainly for spindle, high power, is characterized by a power, cutting skills, especially suitable for cutting dingyu tridimension kanrin, 3, of course, you can also make the breastplate, thenameplate, seal, etc.This type of spindle motor power according to the characteristics of the General frequency can be divided into Brushless AC motor speed and brush AC motor, the main difference is: a, brushless motor speed and high frequency, variable speed range 70060000 go / min, and the General brush AC motor to a maximum speed not exceeding 24 minutes: r / b, brushless motors rotation frequency, precision and high wear small, low noise for noise is well below; brush AC motor c, brushless motor frequency characteristics of good, due to stalling avansys townoffers rychen, a short circuit current – limiting the time of the block will not be burned motor and brush machine in overload or short circuit, will soon smoke and burn – out of repair; d, brushless motor frequency inverter control techniques variable speed, professional – grade product, long life haomen the provision of 1â years of free exchange, you can also replace the high-speed motor bearing pairs arranged for maintenance, and brush motor due to the use of electro – gukje life is about 300 hour you’ll have to replace the motors or electrical carbon brushes, so that the carbon brushes AC motor usually won’t guarantee.
(c) the control mode and speed control mode of choice: now can be divided into three types:
A, all of the work of computer – controlled operation is complete, the engraver at work the computer is working, it was unable to carry out other interpuntion work, which can potentially fixing your computer’s mistake caused by waste products.
B, microcomputer control, this kind of controller can work in the engraver plausible, but we cannot turn off the computer, this is actually pretty to savings 7 a computer, and reduces the computer’s mistake caused by waste products.
C, using a USB port for transferring data, the system has 32 m above the amount of memory.as long as you want to save the file, you can immediately completely out of the computer, turn off the computer or other interpuntion.in this way have greatly improved the efficiency of the engraver.
4. slideway
large format must adopt the engraver for widening the importation of square – shaped guide, its load capacity and ability to maintain the accuracy is circular slideway of 30 times above, to guarantee the engraver Heath high speed.
five, precision
small format engraving 1 Chinese characters, or large format print engraver kizami 1.5mm, under a magnifying glass to look at the very clear.

Tech fortune laser, the leading producer of flying-optics based co2 and fiber laser engraver systems, has hired amy dallman as the company’s new marketing communications specialist.

by effectively managing key projects, performing media relations, and creating useful and compelling marketing pieces, dallman will be a driving force in the conception and execution of epilog laser’s bold and successful marketing campaigns.

“amy’s past experience with high-tech marketing and public relations will serve her well here at epilog,” said james stanaway, director of marketing.

“her creative flair, keen sense of detail, and ability to track and measure the success of each campaign will be valuable assets as well.”
dallman comes to laser engraver from visitech pr, a high-tech business-to-business public relations agency in denver.

Laser engraving ipods and iphones becomes more and more popular. Nowadays nearly nobody wants to leave his home without his ipod. – An individual version of this gadget can be made by engraving it. Just have a look at the video below . Here you can see how easy such an engraving can be made.

A distinction: laser cutting carving polishing a complete mechanical twice completed;
2 distinction, Xizhai delicate parts of places such as squirrels eyes (1 mm in diameter) turning tail, a laser beam can be carved cutting, smooth bright; machinery tool love can help MO;
3 distinction, only a laser beam diameter of 0.1-0.5 mm, machine tool 20 times its big, waste materials;
4 distinction, laser speed, cutting 5 mm thick material 1 meter per minute; machinery only 40 centimeters, laser engraving machine speed is 2.5 times;
5 distinction, laser energy consumption is less than machine engraving machine;
6 distinction, laser noise-free, pollution-free, high-efficiency mechanical machines noisy; pollution of the environment;

Therefore, advertising signs, plexiglass industry, the advantages of laser-engraving machines more and more extensive attention.

The use of laser engraving and cutting, the process is very simple, as in the use of computers and printers print on paper. You can use a variety of circumstances Win98/Win2000/WinXP graphics processing software, such as CorelDraw, such as design, scan the graphics, vector illustrations and a variety of CAD files can be easily “print” to the carving machine. The only difference is that the Tu toner will print on paper, and laser engraving is the laser strikes into wood products, Trans Am tablets, plastic sheeting, sheet metal, stone, etc. Almost all the material on.

* Lattice sculpture

Lattice sculpture resembles high-resolution dot matrix print. Laser head swinging around, each one carving out a series of points of a line, and then moved up and down at the same time the first laser carving out a number of lines and finally a full-page images or text. Scan graphics, text and vector can be used by Lattice sculpture.

* Vector Cutting

Lattice carving and different vector by cutting in line for the outer contour. We usually use this model in wood, Trans Am tablets, paper and other material on the cutting penetration, but also in a variety of materials surface marking operation.

* Carving speed:

Carving speed refers to the first mobile laser speed, usually IPS (inches / sec), to bring high-speed production efficiency. Cutting speed is also used to control the depth of specific laser intensity, the slower the speed, cutting or carving on the depth greater. You can use the engraving machine panel regulating speed, the computer can also use the printer driver to adjust. 1% to 100% within the scope of adjustment is 1%. Hummer of advanced motion control system will allow you to the high-speed carving, still have the carving hyperfine quality.

* Sculpture Strength:

Carving strength in the material that strikes into the surface of the laser intensity. For specific sculpture speed, intensity, the greater the depth of cutting or carving the greater. You can use the engraving machine panel conditioning intensity, can also use the computer printer driver to adjust. 1% to 100% within the scope of adjustment is 1%. Greater intensity, the greater the equivalent speed. Cutting depth of the deep.

* Spot Size:

Laser beam spot size can make use of different focal length lens to regulate. Small spot of high-resolution lens for carving. Big spot for the low-resolution lens sculpture, but Vector cutting, it is the best option. New equipment configuration is the standard 2.0-inch lens. Spot in the middle of its size, apply to all kinds of occasions.

* Carving material:

Wooden products, plexiglass, sheet metal, glass, stone, crystal, Corian, paper, two-color boards, aluminum,